Home » News » Blog » Learn Four Ways Porous Air Turns Improve Production Over Orifice Turn Bars

Learn Four Ways Porous Air Turns Improve Production Over Orifice Turn Bars

Learn Four Ways Porous Air Turns Improve Production Over Orifice Turn Bars

Design engineers in the converting industry are constantly tasked with meeting and exceeding increasing production goals, regardless of the vastly different markets:

  • Flat Panel Displays
  • Semiconductors
  • Solar PV Cells
  • Labeling/Printing
  • Metrology Equipment
  • Printed and Flexible Electronics

Independent of the products, roll-to-roll and web handling processes share many of the same process tools—like web turn bars—used to flip films and substrates at a 90-degree angle. While turn bars are an improvement over conventional ‘oiled’ rollers, New Way® Air Turns provide a superior alternative solution through the use of our Porous Media Technology™.

Porous Media Air Turns vs. Web Turn Bars: Fundamental Differences in Noncontact Technology

Engineers have long been using noncontact solutions to remove the need for oil and lubrication, a common driver of downtime and reduced production. The use of pressurized air provides the lift necessary to perform the same function as conventional rollers without the requirements for maintenance or any of their drawbacks.

Orifice Turn bars represent an outdated form of frictionless motion, utilizing orifices and grooves to create air pathways and allow for noncontact motion.

Porous media turn bars, built on the air turn, employ Porous Media Technology by distributing air through millions of sub-micron holes, creating an even pressure distribution across the substrate. Part of New Way’s 25-year history of Porous Media Technology has been the use of Air Bars for manufacturing Flat Panel Displays.

Air bars provide the ability to control the glass and inspection without contact, all while maintaining control via tunable fly heights and vacuum guideways. A logical next step was the creation of air turns as an alternative to support flexible substrates for noncontact web handling and roll-to-roll processes.

Porous Media Technology provides numerous benefits over orifice bearings, which include:

  • Long-Term Reliability
  • Variable Web Tension
  • Even Air Pressure Distribution
  • Noncontact Inspection
  • Cleanroom Compliance

Four Key Areas Where Air Turns Increase Production

In the packaging industry alone, a recent survey indicated 73% of companies expect an increase in sales in 2017, while also noting improvement of productivity as the biggest challenge. As a result, companies plan to invest 24% more resources into equipment over the next year. Add to this the increased spending for semiconductor equipment and the market demand for flexible electronics.

Design engineers across a wide array of industries are investigating options to increase mass production in web handling. Air turns are poised to help meet the increased demand by overcoming four major production challenges compared to the use of turn bars.

1. Increased Reliability

While turn bars have less wear than conventional rollers, their reliability is still sub-par when compared to air turns. Because of their orifice design, turn bars need to have a larger air gap in order to prevent a (costly) collapse due to restricted airflow.

Because airflow to an air turn passes through millions of sub micron holes, there is no potential for collapse and no dynamic components which can fail, unlike conventional rollers, which often necessitate a production halt so they can be lubricated.

2. Noncontact Inspection

Click to view full IBS report

You can have great productivity but if the processes and/or mechanisms don’t allow for regular inspection, then you won’t be catching any defects until the end of your manufacturing cycle.

Porous media turn bars offer the unique capability of in-situ inspection, allowing you to make use of the air film your material rides on to support non intrusive, interferometry-based inspection stages while your material is still in process.

This technology has already been proven by IBS Precision Engineering and found that an air table produced a maximum web variation of 6µm, compared to 100µm without an air barrier.

3. Roller Contamination and Defect Reduction

While orifice based turn bars provide a noncontact solution, their design inherently sets them up for potential contamination since the air is not distributed evenly. Turn bars can have pressure gradients causing the web to sag, bow, and potentially contact the turn bar itself, resulting in wasted product or even replacement of the turn bar.

Air turns provide an even distribution of air eliminating the pressure gradients, and subsequently, contamination concerns. Furthermore, New Way has pioneered the use of directional control bearings on the air turn, allowing for variable web tension.

The air turn is capable of fly-height thicknesses between 100 and 600µm and web tension up to 200N, meaning no matter the material or substrate, the air turn can compensate and ensure material flatness. This same process has been utilized by New Way’s T-Series and H-Series air bars for Flat Panel Displays to great effect.

4. Cleanroom Compliance

More and more industries are mandating cleanroom conditions for their manufacturing processes, and few value this more than the electronics and semiconductor fields.

As flexible electronics take shape and start to reach the consumer market, manufacturing methods will need to keep pace and ensure that quality doesn’t suffer.

As much as air bars furthered the conveyance of Flat Panel Displays, air turns will do the same for flexible films, all without compromising cleanroom. A traditional contact turn bar would impart defects onto a surface, and along with their need for lubrication, makes contact turn bars incompatible with cleanroom conditions.

New Way Air Turn incorporated into an IBS precision engineering metrology fixture.

While an orifice-based solution might be better, the size of its grooves allows for particle infiltration. New Way recently showed that our air bearing products are ISO 146441-1 Class 3 Cleanroom Compliant; the very Porous Media Technology that powers air bearings:

  • Acts as a sub micron air filter
  • Prevents virtually any particle intrusion into the environment, making them the ideal turn bar replacement for any business taking the next step into cleanroom manufacturing

These four areas have a significant impact on overall production, including quality, which in turn, affect the bottom line. When deciding to use air turns or turn bars, air turns are a superior choice, offering consistent performance and production.

Beyond Turn Bars: The Versatility of Air Turns

While air turns provide an alternative to turn bars, they can also be extended to replacing other components with Porous Media Technology based solutions. Reliability, reducing defects and contamination reduction don’t just apply to turn bars, these benefits can also be gained when you switch from:

  • Roller Bars
    Air turns provide a noncontact solution to replace rollers where friction is a problem. Contamination concerns are eliminated, maintenance is significantly reduced, and performance and overall production is improved.
  • Spreader Bars
    The even distribution face of air turns enables them to remove wrinkles from a web, but with no contact. Furthermore, the tunable nature of air turns allows you to adjust web tension as needed for high speed production. This again eliminates wear and increases reliability, all while resolving contamination concerns and straightening the web.
  • Tension Bars
    Air turns can apply tension to a web without having to move up/down, minimizing wear as well as potential contamination issues.

Ready to Turn Up Your Production?

Whether you are considering a replacement for turn bars or other rollers/bars, we are confident that New Way Air Turns can help you meet production demands. From the semiconductor industry to flexible electronics and basic packaging, air turns can be used to manufacture an extensive range of products.

We’re ready to show you how air turns can be used to increase production for YOUR project. Contact us today for a complimentary consultation to learn how air turns can increase your bottom line!

Contact us today for a complimentary consultation