Home » 25mm ID Air Bushing

S302502S302502 – 25mm ID Air Bushing

 
25mm ID Air Bushing

25mm ID Air Bushing
S302502S302502

Third smallest of the New Way metric air bushing line, the 25mm ID size provides a good balance of size and load-carrying capability on metric shafting. These porous media bushings are an inexpensive way to achieve frictionless linear motion, and compare favorably with conventional rolling element bearings across virtually every performance characteristic. They are also easy to apply, replace or change.

Units: US METRIC
Title Specifications
Size 25 mm25 mm
SKU S302502S302502
Input Pressure 60 psi0.41 MPa
Radial Load Max 42 lb187 N
Radial Stiffness 0.19 lb/μin34 N/μm
Pitch Moment Max 17 lb-in1.9 N-m
Pitch Stiffness 47 lb-in/mil rad5.3 N-m/mil rad
Flowrate on Shaft 9.50 - 12.60 SCFH4.11 - 5.45 NLPM
Air Gap at maximum recommended load 150 micro-inches4 microns
Bushing Inside Diameter (ID) 0.9843 in +.0002/-.00025.022 mm +0.005/-0.000
Bushing Outside Diameter (OD) 1.5 in39 mm
Bushing Length 2.3 in57 mm
Bushing Weight 3.0 oz83 g
Housing Material/Finish Aluminum/AnodizedAluminum/Anodized
Porous Media Material CarbonCarbon
Recommended Shaft Outside Diameter (OD) 0.9843 in25.000 mm
Recommended Shaft Tolerance -.0003/-.0008 in (g6)-7/-20 μm (g6)
Recommended Mounting Bore Diameter 1.555 in +.005/-.00039.50 mm +.13/-.00
Pressure Port Threads M3 x 0.5M3 x 0.5
Maximum Allowable Pressure Supply 100 psi0.689 MPa
Bushing ID Speed 40,000 rpm40,000 rpm
Resolution InfiniteInfinite
Maximum Speed 164.04 ft/s50 m/s
Common Shaft Materials Anodized aluminum, stainless steel, nickel plated steel, ceramics, glassAnodized aluminum, stainless steel, nickel plated steel, ceramics, glass

Attachments:

Mounting Details for 25mm ID Air Bushing

Stainless Steel Shaft
S90S013-xxx – 25mm Diameter

End Mounts
S8025E02 – 25mm Diameter

Mounting Blocks
S8025P02 – 25mm I.D.

Replacement “O” Rings for Bushings
S90RG2-126 – 25mm

Air Fittings
All M3 Thread Size Air Fittings

Contact us today for a complimentary consultation